About this tool
A VA rating tells you how much current a UPS or inverter can carry, but not how much useful power it can deliver. Enter the VA figure and power factor to estimate the watts your equipment can actually draw.
How to use the VA to Watts Calculator
- Enter the apparent power and power factor.
- The result updates instantly, with the working shown underneath.
- Use Copy to grab a result, or Reset to start again.
How it works
Real power (W) = apparent power (VA) × power factor. Resistive loads have a power factor of 1; computer power supplies with active PFC are typically 0.9–0.99, while older UPS units are often specified at 0.6–0.7.
Formula
Examples
1000 VA UPS at PF 0.6
1000 × 0.6 = 600 W maximum load.
2000 VA inverter at PF 0.8
2000 × 0.8 = 1600 W.
Frequently asked questions
What power factor should I use?
Use the value from the equipment nameplate if available. Resistive loads such as heaters are close to 1.0; induction motors are typically 0.75–0.9 at full load. DC circuits have no power factor.
Which limit applies — VA or W?
Both. A UPS must stay within its VA rating and its watt rating; check the datasheet for each.