Conduit Bend Calculator (Offset)

Calculate the distance between bends and shrink for conduit offsets.

Distance between bends12in
Multiplier (cosecant)2
Shrink1.608in
Shrink per unit of offset0.2679
Distance = offset × csc(30°) = 6 × 2 = 12 Shrink = offset × tan(30°/2) = 1.608

Runs entirely in your browser — nothing you enter is uploaded.

About this tool

Electricians bend EMT and rigid conduit to clear obstacles. Get the spacing between the two bends of an offset and how much the run shortens.

How to use the Conduit Bend Calculator (Offset)

  1. Enter the offset height, bend angle and units.
  2. The result updates instantly, with the working shown underneath.
  3. Use Copy to grab a result, or Reset to start again.

How it works

Distance between bends = offset × csc(angle). Shrink = offset × tan(angle/2).

Formula

D = H / sin θ; shrink = H × tan(θ/2)

Frequently asked questions

What multiplier is used for 30° bends?

2.0 (csc 30°).