Stair Calculator

Calculate the number of steps, riser height, run and stringer length.

Number of risers14
Riser height7.714in
Number of treads13
Total run136.5in
Stringer length (approx.)174.06in
Stair angle38.35°
2R + T rule25.93 in — outside the usual comfort range
Building codes set maximum riser and minimum tread sizes (for example, US IRC: 7¾ in riser, 10 in tread). Always check local code.

Runs entirely in your browser — nothing you enter is uploaded.

About this tool

Lay out a straight staircase from the total rise. The calculator rounds to a whole number of equal risers and checks the comfort rule.

How to use the Stair Calculator

  1. Enter the units, total rise (floor to floor), target riser height and tread depth.
  2. The result updates instantly, with the working shown underneath.
  3. Use Copy to grab a result, or Reset to start again.

How it works

Risers = round(total rise ÷ target riser). Treads = risers − 1. Stringer length is the hypotenuse of total rise and run.

Formula

n = round(rise / target); run = tread × (n − 1)

Frequently asked questions

What is the 2R + T rule?

Two risers plus one tread between 24 and 25 inches (≈ 61–64 cm) tends to feel comfortable.